Pyronix ATLAS 8 User Manual

Page 24
11.16.2 Zone Tamper Reporting Codes
Enter
HQWHU VHTXHQFH followed by 2 digits for each tamper zone. To disable an event insert blanks by
pressing the
key in place of the two digits.
Examples Tamper zone 1
Tamper zone 2
Tamper zone 3
Tamper zone 4
Tamper zone 5
Tamper zone 6
Tamper zone 7
Tamper zone 8
To use HEX codes, use the
key to select the character required and the key to accept.
Reporting codes are automatically stored after the 16th key press.
11.16.3 System Set / Unset Reporting Codes
Enter
HQWHUVHTXHQFHEnter 2 digits for each of the system set / unset reporting codes. To disable an event
insert blanks by pressing the
key in place of the two digits.
Examples Set A
Set B
Set C
Set D
Duress Set
Duress Unset
Confirmed alarm code
To use HEX codes, use the
key to select the character required and the key to accept.
Reporting codes are automatically stored after the 14th key press.
11.16.4 User Set reporting codes
Enter
HQWHUVHTXHQFH Enter 2 digits for each of the user set reporting codes. To disable an event insert
blanks by pressing the
key in place of the two digits.
Examples Set User 1
Set User 2
Set User 3
Set User 4
Set User 5
Set User 6
Set User 7/Keyswitch
To use HEX codes, use the
key to select the character required and the key to accept.
Reporting codes are automatically stored after the 14th key press.

Pyronix ATLAS 8 Specifications

General

Brand	Pyronix
Model	ATLAS 8
Category	Keypad
Language	English