Pyronix Enforcer 32-WE Programming Reference Manual

Page: 29
Example SMS
command send:
Description: Example SMS command
response:
123456 Arm A
Bypass 4
123456 = User Code. Arm A Bypass 4’ = Arms Area A
and will bypass input number 4.
Input Bypass; Area A Input
04
Forced Arm; Area A
123456 Arm A Bypass
Kitchen
123456 = User Code. Arm A Bypass Kitchen= Arms
Area A and will bypass the input that is called Kitchen.
Input Bypass; Area A
Kitchen 04
Forced Arm; Area A
NOTE: Input numbers need to end with an apostrophe and an Input name needs to be inside quotation
marks.
Bypassing inputs via SMS text command
Example SMS
command send:
Description: Example SMS command
response:
123456 Bypass 6 123456 = User Code. Bypass 6 = Input number 6 will
be bypassed on the next arming procedure.
Input Bypass; Area A Input
06
123456 Bypass Garage 123456 = User Code. Bypass Garage = The input
called Garage will be bypassed on the next arming
procedure.
Input Bypass; Area A
Garage 06
NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example,
Garage Door is not acceptable. It has to be written as Garage-Door in the panel and the respective command
will be Garage-Door
Checking the System Status via SMS text command
Example SMS
command send:
Description: Example SMS command
response:
123456 Status 123456 = User Code. Status Area A Disarmed No Faults
Area B Disarmed No Faults
Area C Disarmed No Faults
Area D Disarmed No Faults
Operating the User Automation Outputs via SMS text commands
Example SMS command
send:
Description: Example SMS command
response:
123456 Output 1 On 123456 = User Code. User Output 1 turns on. OUTPUT 1 ON
123456 Output Garage-
Door On
123456 = User Code output Garage-Door on =
Turns output named as Garage-Door on.
OUTPUT Garage-Door ON
123456 Output Garage-
Door Off
123456 = User Code output Garage-Door off =
Turns output named as Garage-Door off.
OUTPUT Garage-Door OFF
NOTE: The user automation outputs can be also activated via the keypad or the keyfob.
NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example,
Garage Door is not acceptable. It has to be written as Garage-Door in the panel and the respective command
will be Garage-Door.
Checking the User Automation Outputs status via SMS text commands
Example SMS command
send:
Description: Example SMS command
response:
1234 Output 1 Status 123456 = User Code. User Output 1 status
check.
OUTPUT ON or OUPUT OFF

Pyronix Enforcer 32-WE Specifications

General

Brand	Pyronix
Model	Enforcer 32-WE
Category	Security System
Language	English