PCX 256 USER MANUAL
RINS867-2 Page: 21
CHAPTER 4: THE MANAGER MENU
NOTE: You can only enter the Manager Mode when the system is disarmed
4.1 E ntering The Manager Menu
The PCX system has a user menu that is accessible via a master manager code. To enter the
manager menu:
1. Press the © key once. ‘Enter Your Code’ will be displayed
2. Enter the master manager code (default 5678).
3. Use the ¦ and keys to scroll through the different options:
Functions Description
SET DATE & TIME
Set / Adjust time and date for display and system
logs.
OMIT INPUTS?
Temporary omission of 24-hour inputs whilst
system is disarmed
CHANGE CODES?
Program and change User and Manager codes or
tags. Also authorisation of tags for sub-partition /
access control purposes.
REVIEW LOGS?
Panel Log: Review entries in panel log –
arm/disarm events, alarm events, etc.
Access Log*: Review entries in access log (if
facility used)
PHONEBOOK?
Lets you change the SMS numbers programmed
for text messaging service.
WALK TEST?
Enable detector operation to be tested
BELL TEST?
Enable system siren and strobe to be tested
TEST PHC COMMUNICATIONS?
Initiate a test call to the Pyronix Host Computer
(PHC) if SMS messaging in use
DIAL OUT MENU?*
Allows the PCX system to connect to a PC and
allows the user to choose which option they would
like to perform
ALLOW ENGR MENU?
User has the facility to disable access to the
engineer menu
BLOCK REMOTE ARM?
Blocks anyone trying to remotely arm and disarm
the system
BLOCK UDL?
Downloading is only allowed in Engineers Mode
ENTER ANTI-CODE?
Anti-Code features
EXIT MANAGER MODE?
Returns you to day mode. Can also be performed
by pressing the ¤ key.
Press the key to enter the required function.
4.2 Exiting The Manager Menu
1. To exit the Manager Menu, make sure that you are not in a function, i.e. that you are back in
the main menu (all menu items are capitals), and press the ¤ key.
To Next Page
Loading...
Need help?
General
