PCX 256 USER MANUAL
RINS867-2 Page: 5
DISARMED LED
This will illuminate for a couple of seconds after the system
has been disarmed.
NUMERICAL BUTTONS
Used to enter user codes and program input names
DIRECTION BUTTONS
Used to select options and scroll display.
OPERATIONAL BUTTON 1
Selects items and enters sub menu indicated in master
manager menu.
Used to arm the panel if flexi-arm is enabled.
OPERATIONAL BUTTON 2
Moves forward to the next main menu item, also clears faults.
THE A KEY
Exit Manager Mode (from a main menu item)
THE B KEY
Moves backwards to the previous menu item
THE C KEY
Chime Button and displays additional information in the log
and the diagnostic functions.
THE D KEY
Moves forward to the next option, or toggles between
‘YES/NO’ choices. Enters the manager mode.
The emergency buttons for the PCX system consist of 2 buttons being pressed to activate a Hold
Up. These are the keys ! and &. On default these are disabled to comply to PD6662. If you
wish for these to be enabled please contact your engineer.
To Next Page
Need help?
General
