Sterling 10 User Manual
Page: 16 RINS415-9
3.6 System Faults
There are 4 fault conditions automatically detected by the Sterling 10. The user is informed of a fault
via a flashing '
' (LCD keypad) or '_' (Icon keypad) and an error tone will be emitted every 5
seconds when the panel is in disarmed mode. Press the function key to stop the error tone. The '
' or
'_' will remain on until the fault has been corrected.
LCD Keypad
To determine the fault go into the log by:
Pressing the key
Followed by the key.
The fault will be displayed:
Bell Fuse Failure.
Auxiliary Fuse Failure.
Telephone Line Failure.
Mains (AC) Failure.
Press to exit the log.
ICON Keypad
The symbol will be displayed.
Press the > key to see the fault as described below:
T
Bell Fuse Failure.
Z
Auxiliary Fuse Failure.
H
Telephone Line Failure.
U
Mains (AC) Failure.
Press C to exit the log.
Ente
Func
B
D
E
F
Enter
Func
To Next Page
Loading...
Need help?
General
