Pyronix STERLING 10 User Manual

Sterling 10 User Manual
RINS415-9 Page: 5
2.4 Arm with Omits
It is possible to arm the panel with one or more zones omitted (that is, not activated). The sensors for
these zones will not activate the alarm system under any circumstances for that arm procedure.
 Enter your 4-digit code
 Press the (LCD) or C(ICON) key
 Followed by the key
Then enter the numbers of the zone to be omitted, (Zones 1 to 8). If, for example, you want to omit
Zone 1 (default text F DOOR), the following will be displayed:
 Then press the (LCD) or C(ICON) key.
The Entry/Exit timer will start to countdown, once armed the chosen zone(s) will be omitted from that
arm mode only. Arming the panel in future will not have these omits enabled unless you omit the
zones again using the above function.
2.5 Disarming the Panel
The panel may be disarmed by entering the building via the Entry/Exit route and entering on the
keypad either the Master Code or any User Code.
2.6 Reset After Alarm Condition
After an alarm condition, enter the user code (Default 1234):
A
A
B
C
Y
Z
S
T
U
V
W
X
B
D
E
F
C
G
H
I
D
J
K
L
M
N
O
P
Q
R
Enter
SPACE
A
RM
Func
P.A.
Fire
STERLING
SYSTEM DISARMED
F DOOR
A
A
B
C
Y
Z
S
T
U
V
W
X
B
D
E
F
C
G
H
I
D
J
K
L
M
N
O
P
Q
R
Enter
SPACE
A
RM
Func
P.A.
Fire
STERLING
SYSTEM ARMED
ALARM LOUNGE
Enter
Func
Enter
Func
SPACE

Pyronix STERLING 10 Specifications

General

Brand	Pyronix
Model	STERLING 10
Category	Control Panel
Language	English