QNAP QSW-M3212R User Manual

4. QSS
About QSS
The QNAP Switch System (QSS) is a network management operating system for QNAP switch devices. QSS
allows for Layer 2 network administration and system management of the switch.
Getting started
1. Log in to the switch as an administrator.
The default administrator account is admin.
For details, see Switch access.
2. Congure the system settings.
For details, see System settings.
3. Congure port settings and other network settings.
For details, see Network management.
Network management
Basic network conguration of the switch includes port management, VLAN conguration, conguration of
various protocols, and trac management via quality of service (QoS) and access control lists (ACLs).
Dashboard
The dashboard opens to the conguration section of the interface. Click the drop-down menu in the
dashboard to view the port status, VLAN status, link aggregation status, and port trac for all ports.
You can also delete user-congured network settings and monitor the network settings of the switch.
Conguring port settings
1. Log in to QSS.
2. Go to Conguration > Port Management .
3. Go to Port Conguration.
4. Identify a port.
5. Congure the settings.
Setting Description
State Enables or disables the switching port
Speed Allows the port speed to be auto-negotiated or controlled using the
selected speed
Flow Control Enables or disables ow control for the port
6. Click Save.
QSS saves the settings.
QSW Managed Switches User Guide
QSS 18

QNAP QSW-M3212R Specifications

General

Brand	QNAP
Model	QSW-M3212R
Category	Switch
Language	English