QNAP QSW-M3212R User Manual

1. Product Overview
This chapter provides basic information about the QNAP QSW-M3212R and QSW-M3216R switches.
About the QSW-M3212R and QSW-M3216R
To provide a robust and ecient way to manage network trac, the QSW-M3212R features four 10 GbE RJ45
ports and eight 10 GbE SFP+ ports, while the QSW-M3216R features eight 10 GbE RJ45 ports and eight 10
GbE SFP+ ports.
Both switches can be accessed using the QNAP Switch System (QSS) to simplify network management,
oering complete transparency into your network. The switches provide exible scaling and integration for
expanding your network infrastructure.
Hardware specications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third
party invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specications are subject to change without prior notice. To see the latest
specications, go to https://www.qnap.com.
Component QSW-M3212R-8S4T QSW-M3216R-8S8T
Processor
CPU Marvell® 98DX3550
Chipset
Memory 8 GB
Network interfaces • 4 x 100M/1G/2.5G/5G/10G RJ45 ports
• 8 x 1G/10G GbE SFP+ ports
• 8 x 100M/1G/2.5G/5G/10G RJ45 ports
• 8 x 1G/10G GbE SFP+ ports
Management
interfaces
• Console ports: 1 x RJ45 port
• Management ports: 1 x Marvell ® 88E1512 1 GbE port
Interface
Buttons Switch reset
LEDs
System • Status
• Locator
QSW Managed Switches User Guide
Product Overview 3

QNAP QSW-M3212R Specifications

General

Brand	QNAP
Model	QSW-M3212R
Category	Switch
Language	English