Quectel SC262R Series User Manual

Smart Module Series
SC200R&SC262R_Series_Hardware_Design 60 / 124
3.16. ADC Interface
SC200R series module supports one analog-to-digital converter (ADC) interface. The ADC interface
supports resolution of up to 15 bits. The pin definition is shown below.
Table 21: Pin Definition of ADC Interface
3.17. Motor Drive Interface
The pin definition of the motor drive interface is listed below.
Table 22: Pin Definition of Motor Drive Interface
UART5_CTS
36
DO
SPI5 chip select
Can be multiplexed into SPI5_CS
GPIO_22
117
DO
SPI6 chip select
Can be multiplexed into SPI6_CS
GPIO_23
116
DO
SPI6 clock
Can be multiplexed into SPI6_CLK
GPIO_20
119
DO
SPI6 data output
Can be multiplexed into SPI6_MOSI
GPIO_21
118
DI
SPI6 data input
Can be multiplexed into SPI6_MISO
GPIO_87
105
DO
SPI7 chip select
Can be multiplexed into SPI7_CS
GPIO_85
265
DO
SPI7 data output
Can be multiplexed into SPI7_MOSI
GPIO_88
264
DO
SPI7 clock
Can be multiplexed into SPI7_CLK
GPIO_86
239
DI
SPI7 data input
Can be multiplexed into SPI7_MISO
Pin Name
Pin No.
I/O
Description
Comment
ADC
128
AI
General-purpose ADC
interface
The maximum input voltage is 1.7 V.
Pin Name
Pin No.
I/O
Description
Comment
VIB_DRV_N
28
PO
Vibration motor
driver output control
Connect it to the negative pole of the motor.

Quectel SC262R Series Specifications

General

Brand	Quectel
Model	SC262R Series
Category	Control Unit
Language	English