RADWAG AS PLUS Series User Manual

- 32 -
• Enter the user database
• Select the user that is to be removed from the list
• Press button
• The software shows <DELETE?> message in the bottom line
• Confirm by pressing button
• When confirmed, the software removes the selected user from the list
9.2. PRODUCTS
PRODUCTS – 1000 different products.
The following data can be inserted for each product:
• NAME (30 characters),
• CODE (6 characters),
• EAN (16 characters),
• MASS (with the accuracy of a reading unit),
• TARE (mass of the packaging relating to a particular product with the accuracy of a reading
unit),
• MIN (low limit for the <CHECKWEIGHING> mode, to be inserted with the accuracy of a reading
unit),
• MAX (high limit for the <CHECKWEIGHING> mode, to be inserted with the accuracy of a
reading unit),
• TOLERANCE (tolerance limits to [±] for <DOSING> mode, entered as a % of the target mass).
In order to add a product, enter products database and add name of the product along with
respective data (follow the procedure as in the section above).
9.3. TARES
TARES – 10 different weights of the packaging.
The following data can be inserted for each packaging:
• NAME (30 characters),
• TARE (packaging weight, enter a value with the accuracy of a reading unit).
In order to add tare – packaging weight, enter tare database and add name of the tare along with
respective data (follow the procedure as in Users section).
9.4. WEIGHINGS
Weighings database is non-editable i.e. the data relating to the weighings is saved automatically. A
user has a possibility of viewing this data and printing it out or exporting it to a PENDRIVE (if such a
need occurs go to later sections for more information on export).
The balance software allows you to save and store up to 5 000 measurements carried out on the
balance. This occurs automatically, after pressing the <PRINT> button, no additional actions or
settings change is needed.
Additional data is saved along with the measurement.
• Date of the measurement
• Time of the measurement
• Measurement result (mass)
• Tare value
• Name of the product that has been weighed
• Person carrying out the measurement (logged-in user)
• Working mode for which the measurement has been carried out

RADWAG AS PLUS Series Specifications

General

Brand	RADWAG
Model	AS PLUS Series
Category	Scales
Language	English