- 85 -
[?] if unstable
[^] if high limit is out of range
[v] if low limit is out of range
[space] for positive values
[-] for negative values
11 characters - right justification (digit markers contained)
3 characters - left justification
Example:
_ _ _ _1 8 . 3 4 3 [ 2 0 ] _ g _ _ CR LF - a printout generated, for <GLP printout template> settings as
given in the above table, from a weighing device upon pressing
key.
14.1.1. Response Format
On receipt of a command, the balance responds as follows.
• first:
command understood and in progress
command understood but not accessible at this moment
command understood but max threshold is exceeded
command understood but min threshold is exceeded
XX _ E CR LF
time limit exceeded while waiting for stable measurement result
(time limit is balance characteristic parameter)
Where XX stands for command name.
• next:
command
space
stability
marker
space
character
mass
space
unit
CR
LF
[?] if unstable
[^] if high limit is out of range
[v] if low limit is out of range
[space] for positive values
[-] for negative values
9 characters - right justification
3 characters - left justification
To Next Page
Loading...
Need help?
General
