- 37 -
More data can be recorded in the same file. The balance software will add the data to the file that has
already been created on a flash drive. Consequently, you can continue saving measurements in the
same file once created.
CAUTION:
USB flash drive shall feature <FAT file system>.
11. WORKING MODES
− Weighings
− Parts Counting
− Checkweighing
− Dosing
− Deviations % in reference to mass of the standard
− Animal Weighing
− Density Determination of Solids
− Density Determination of Liquids
− Statistics
− Totalising
− Peak Hold
− Pipettes Calibration
In order to run a particular mode press
button, and select the mode from the list.
Once the button
has been pressed, the name of the first available function is shown.
or - press to select working mode
- press to enter the selected working mode
CAUTION!
Upon restart, the balance is launched with the most recently operated working mode!!! For settings of this
function read later sections of this user manual.
11.1. WORKING MODES ACCESSIBILITY
Group of parameters enabling the user to declare which functions are to be accessible. You can
deactivate functions that are not used in course of balance operation, to do it, value <NO> has to be
selected for a particular parameter.
To Next Page
Loading...
Need help?
General
