RADWAG AS PLUS Series User Manual

- 8 -
Balance with pan Φ 115 mm
Balance with pan 195x195 mm
Upon unpacking, remove all transport locks and assembly the following elements:
- draft shield (1)
- weighing pan shield (3) and weighing pan
(2)
- plug the power supply connector into the
socket (4),
- plug the power supply to the mains.
CAUTION!
While cleaning it is advisable to follow below precautions. Additionally it is a must to disconnect the device from
mains and unplug all the peripherals (printers, computer etc.) remembering at the same time to protect ports by
means of stoppers. Only thus prepared device can be cleaned. Upon completion of the cleaning process the
device may be connected to mains for further operation.

RADWAG AS PLUS Series Specifications

General

Brand	RADWAG
Model	AS PLUS Series
Category	Scales
Language	English