V-09 05/2014 - 24 -
Heat shield left and right
If the minimum required distance to heat sources on
the left or right side (right side only 6x1/1 GN and
10x1/1 GN) can not be maintained a heat shield will
help to reduce the heat stress to the unit
pic 1.
Unit size:
6x1/1GN Art.-Nr.: 60.70.390 left
6x1/1GN Art.-Nr.: 60.70.736 right
10x1/1GN Art.-Nr.: 60.70.391 left
10x1/1GN Art.-Nr.: 60.70.743 right
6x2/1GN Art.-No.: 60.70.392
10x2/1GN Art.-No.: 60.70.393
20x1/1GN Art.-No.: 60.70.394
20x2/1GN Art.-No.: 60.70.395
Height extension of table units.
(6x1/1 GN up to 10x2/1GN)
Should the distance between floor and bottom of
table units be too low (e.g. when installing combi
duo), then the standard lower parts of the legs can
be replaced by longer legs.
Art.-No.: 12.00.224 pic. 2
Attention: In this case the height of the upper rail in
the cooking cabinet exceeds 63” (1600
mm)
When using mobile oven racks and transport trol-
leys the height difference can be compensated by a
height adjustable
transport trolley. pic. 3
Height adjustable trolley:
Unit size:
6x1/1 and 10x1/1 GN Art.-No.: 60.60.188
6x2/1 and 10x2/1 GN Art.-No.: 60.70.160
2
3
1
Option
To Next Page
Loading...
Need help?
General