12 | Kitchen management
80 / 96 Original instructions for use
>> You will receive an email confirming that the cooking system has been registered successfully.
12.5 Run software update
Automatic software updates via ConnectedCooking
a Start by connecting your unit to ConnectedCooking.
1. Press this button:
2. Press this button: ConnectedCooking
3. To activate the Download software updates automatically function, press the button:
ON
4. Press this button:
5. Press this button: Service
6. Press this button:
Software update info
7. Press this button: Start installation
>> The software update is carried out and the unit is rebooted.
Software update via USB stick
a You have connected a USB stick containing a software update to the unit.
a A message appears informing you that a software update has been detected.
1. Confirm the message that a software update should be carried out.
>> The software update is carried out and the unit is rebooted.
To Next Page
Loading...
Need help?
General
