4 | Transport
80.06.070_iCombi Pro-iCombi Classic_IM_V01_en-GB 21 / 92
NOTICE
Transporting with a transport aid without protection
Transport the unit as far as you can on the pallet. Do not transport the unit
without protection with a transport aid or a similar transport tool. For
protection, you can use a wooden pallet.
Required door width with transport pallet
Unit size 6-2/3 6-1/1 6-2/1 10-1/1 10-2/1 20-1/1 20-2/1
x (mm) 880 945 1150 945 1150 989 1194
x (inch) 34 5/8 37 1/4 45 1/4 37 1/4 45 1/4 38 7/8 47
y (mm) 930 935 1170 935 1170 969 1174
Y (inches) 36 5/8 36 3/4 46 1/8 36 3/4 46 1/8 38 1/8 46 1/4
Transporting tabletop units with transport pallet
a The packaging material is removed.
a The unit is on the shipping pallet.
a The unit is on the base frame.
1. Transport the unit to its place of installation with the transport pallet.
2. Lift the unit at the lifting points or with the aid of the transport straps from
the transport pallet and place it on its intended installation surface. Follow
the description for transporting using carrying straps in this manual.
>> The unit is standing on its intended installation surface and is ready for in-
stallation.
Transporting standalone units with transport pallet
Upon delivery, standalone units are on a special, separable transport pallet.
a The packaging material is removed.
a The unit is on the shipping pallet.
a The unit feet are positioned in the rubber frame of the shipping pallet.
To Next Page
Loading...
Need help?
General