5 | Placement
80.06.070_iCombi Pro-iCombi Classic_IM_V01_en-GB 39 / 92
5.3.2 Securing the standalone unit
CAUTION
Shifting the unit to the installation position.
Risk of crushing if the unit is shifted.
Gas units can damage gas lines.
n
Secure the unit with the fixing kit.
Secure the standalone unit against slipping with the mounting kit.
The mounting kit including the special label, screws and dowels is not included
in the delivery of the unit and can be ordered separately from the manufacturer
under article number 8700.0317.
Adhere to the clearances of the foot locks for the relevant unit sizes:
20-1/1 20-2/1
x [mm] 741 946
x [inch] 29 1/8 37 1/4
a The foot locking mechanisms and the mounting kit are ready for use.
1. Fix the foot locks to the floor for the front feet with the special adhesive or
screws and anchors. Make sure that both foot locks with the openings show
towards the front.
To Next Page
Loading...
Need help?
General