Preheat
rare welldone65° rare welldone70°
RESET GAS
- 17 -
Your unit has a touch screen. You can make settings on your unit by just touching it lightly with your finger.
The cooking process (e.g. Joints)
is activated as soon as you press
the button.
You can change the settings using
the central dial.
Your settings are automatically
accepted within 4 seconds. Other-
wise you can press (Push function)
the central dial.
General instructions for use
The status of the preheating
temperature is displayed in red
and blue.
The end of a cooking process is
indicated by the flashing Self-
Cooking Control
®
button.
If the cooking cabinet is hotter
than the temperature set, the
button for the mode selected will
flash (e.g. Dry Heat).
(See the "Cool Down" section for
cooking cabinet cooling).
General notes
Low water level is displayed when
the steam generator is no longer
full (open the water valve). The
display goes out automatically
after filling.
Press "RESET GAS" to re-start
the automatic ignition process.
Please notify Customer Support if
the display is still lit after repeated
pressing.
To Next Page
Loading...
Need help?
General