9:24
CleanJet+care
cooking cabinet
too hot
interim
cleaning
medium strong
light
rinse
without tabs
rinse
open door
1:45
1x 2x
remove grids/
containers
1x 2x
- 50 -
CareControl –
CleanJet
®
+care cleaning
CleanJet
®
+care is the automatic cleaning system for cleaning the cooking cabinet.
With 6 cleaning steps, it can be adjusted to suit the individual degree of soiling.
Press the Function button Select CleanJet
®
+care "Unit too hot" appears when
the cooking cabinet temperature
exceeds 75 °C. Select "Cool
down" (see the "Cool down"
section)
Select cleaning stage Open cooking cabinet door,
remove containers and grids
Stainless steel grids, CombiFry
®
and poultry SuperSpikes may
remain in the cooking cabinet
care
start time
settings
Attention:
- For hygiene reasons and to prevent malfunctions it is essential to clean the unit every day - Risk of fire
- Please note that your unit must be cleaned every day, even if it is only operated using moist heat.
- Use only the unit manufacturer’s detergent and care tabs. The use of other chemical cleaners may damage
the appliance. We shall not be liable for any damage that might result.
- You may experience foaming if too much chemical cleaner is used.
- Never put tablets in the hot cooking cabinet (>60 °C).
- If you are using softened water, you can reduce the recommended number of cleaner tabs by up to 50 %.
If foaming does occur, even though the amount is correct, then the number of cleaner tablets should be
reduced.
- Strong foam creation even by reduced detergent levels, please contact your service partner for more infor-
mation. For example the de-foamer tabs, article no.: 56.00.598.
To Next Page
Loading...
Need help?
General