Install RS1™ with DirecSteer
Note: This section only applies to DirecSteer kits with RS1™ guidance. For SC1™/TC1™
information, see "Install SC1™/TC1™ with DirecSteer" on page55.
CAUTION
Do not connect the system power cable to the vehicle ignition or
battery until all system components are mounted and all elec-
trical connections are completed.
Install the RS1™ Unit 36
Insert a SIM Card in the RS1™ 36
Assemble the Mounting Brackets 37
Prepare the Roof 37
Connect RS1™ Cabling to DirecSteer 38
Best Mounting Practices 39
Route the RS1™ Cabling to DirecSteer 40
Connect to Power 48
RS1™ and DirecSteer System Diagrams 49
35
Chapter 5:
Install RS1™ with DirecSteer