Record the Time and Date, AUTO Date, Auto TITLE, or Date
The time and date, AUTO date, auto TITLE, date only, or no date can be recorded on
your tape. Whenever one of these displays appear, it will be recorded.
To Select the Display to Record
l°
Repeatedly press DATE/TIME to
select the display you want to record.
• Date and Time Display: The date
and time will be displayed and
recorded.
• (_)AUTO Date: The date is
automatically recorded for approxi-
mately 10 seconds at the beginning
of the recording.
• (S) TITLE: The date and title you
have created are displayed and
recorded for approximately 10
seconds at the beginning of the
recording.
• Date Display: The date is dis-
played and recorded.
• No Display: No display is dis-
played or recorded.
Charge the Built-in Clock Battery
The camcorder has a built-in rechargeable battery that must be charged
approximately every two months.
1. Attach a power supply and set the
CAMERA/OFF/VCR switch to OFF.
2. Leave the power supply attached at
le[st 24 hours.
23
To Next Page
Loading...
Need help?
General
