RCA CC4371 User Manual

2. Attach the adapter/charger.
To AC 120V,
50/60 Hz
Ad._
Charger
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
1. Attach one end of the adapter/
charger's DC cable to the DC
OUTPUT jack on the side of the
adapter/charger.
DC IN 9.6V
Jack
2. Attach the other end of the cable
to the DC IN 9.6V jack on the
camcorder.
3. Plug the adapter/charger's plug
into an operating outlet.
4. Details are on page 14.
3. Adjust the handstrap, remove lens cap, and attach
it to the handstrap. _ ........................................................................................................................................................................................................
Cap on
Handstrap
4
1. Open the handstrap, insert your
hand, and adjust the handstrap to
fit your hand.
2. Remove the lens cap and attach it
to the handstrap as shown.

RCA CC4371 Specifications

General

Brand	RCA
Model	CC4371
Category	Camcorder
Language	English