Tape Counter
The tape counter acts as a handy reference to help you locate tape segments.
The memory-stop feature helps locate a certain point on the tape. When the
tape counter appears, the tape stops automatically during rewind or fast
forward when the tape counter reaches O000M.
DISPLAY CAMERA/ REW/
Button RESET OFF/VCR REVIEW
Button Switch Butto_
o
F.FWD Button
STOP/EJECT
Button
Use the Memory-Stop Feature
1. Press REC/PAUSE to pause recording.
Make sure the displays appear in the
viewfinder or on the LCD monitor.
If they do not, press DISPLAY.
2. Locate the place on the tape you want
to return to, and press RESET to reset
the counter to O000M.
oooo_
.
38
Tape Counter
With Memory Stop
Continue to record or play the tape.
When you want to return to the place
.
you marked, press the REC/PAUSE
button to stop recording or the STOP/
EJECT button to stop playback.
Press and hold the small button while
you set the CAMERA/OFF/VCR
switch to VCR.
5. Press the REW/REVIEW button.
The tape rewinds to the counter
reading of O000M.
Notes: Press DISPLAY to display or remove
the tape counter. Memory stop is turned on
whenever the tape counter appears.
The camcorder stops rewinding or fast
forwarding when the counter reaches O000M.
To continue rewinding or fast forwarding,
press the button again.
The tape counter automatically resets to
O000M whenever a cassette is inserted.
To Next Page
Loading...
Need help?
General
