To Next Page

To Previous Page

Send Key conguration

Admin can set a specic button (“#” or “*”) as the send key. If this feature is

enabled, once you’ve dialed the desired number, you can press this send key to call

your correspondent immediately.

To set the send key via the IP phone interface:

1) Make sure active User Type is admin or var.

2) Press MENU/BACK [ 2. FEATURES[ 4. SEND Key to enter the conguration page.

3) Press the LEFT/RIGHT navigation keys to choose a button that you want to use

as the send key: “#”, “*”, or disable this option. Note that currently active option

has an “*” on the left.

4) Press the OK button to save the changes, or MENU to cancel.

Hot Line

Hot Line allows your phone to dial a number automatically if it has been o hook

for a specied time period and no keys have been pressed. Both destination num-

ber and timeout can be congured.

The service is enabled if Hot Line Number has been congured.

To set the hot line number via the IP phone interface:

Press MENU/BACK[2. FEATURES [3. HOT LINE to enter the conguration page.

( if the active user type is admin or var , press MENU/BACK [2. FEATURES [5.

HOT LINE )

Enter the hot line number and press UP or DOWN navigation key to select HotLine

Delay. Set the Hot Line Delay (default is 4 seconds), then press the OK button to

save the changes.



1. Send Key:

<*# >

RCA IP110 User Manual

Other manuals for RCA IP110