RCA IP110 User Manual

40
4141
Transfer
You are able to congure a key as a TRANSFER key to perform a Blind/Attended/
Semi-Attended Transfer. The main dierence this key and the CALL TRANSFER
hard key is in this case you can pre-congure the number to which transfer will
be performed. This is very useful when there are only a few numbers to which you
usually transfer calls.
To assign the key as the Transfer key via the web interface:
Go to PHONE [FUNCTION Keys (Line Key)
Hold
The key can be congured as a HOLD key. You can use this key to hold and retrieve
a call during the conversation.
To assign the key as Hold via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
DND
If the key is congured as DND key, it will work as a toggle key to enable/disable
this service.
Please check DND chapter in the Incoming calls section of Basic Call Functions
chapter for more information about this function.
To assign DND to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Call Return
Call Return function dials out the last number from which you received a call.
If there is already an active call, when pressing Call Return key the rst call will be
put on hold and a new one will be sent to the Call Return number
To assign Call Return to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Pick Up
Pickup key allows you to perform call capture from another ringing station with a
single key press. This feature is not supported by all servers. Please check with your
service provider or network administrator for more details.
To assign Pick Up to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)

RCA IP110 Specifications

General

Brand	RCA
Model	IP110
Category	IP Phone
Language	English