MOVI E ADVANCE ®
The Movie Advance feature helps you locate certain parts
of prerecorded movies (rented or purchased). This feature
works two ways: 1) you can go to the beginning of the
movie skipping any previews on the tape, or 2) you can
skip from one preview to the next. This feature works only
on cassettes recorded in the SP speed with the safety tab
removed.
1. To select the Movie Advance feature, insert a
purchased or rented tape with the safety tab removed
and press SEARCH on the remote control. The
following menu appears:
MOVIE ADVANCE
What type of tape
is this?
I Purchased/Rented Movie
2 Home Recording
3 Other
.
Press CLEAR to cancel
Press 1 if the tape is a purchased or rented movie,
press 2 if it's a recording made at home, or press 3 if
it's something else, you don't know, or you do not
want to use the Movie Advance feature.
Pressing 2 or 3 gives the same response and takes you
to a different search feature. If you accidentally make a
wrong selection, press STOP.EJECT on the VCR (STOP
for a few seconds on remote control) and reinsert the
tape. Press SEARCH.
If you press 1, the MOVIE ADVANCE menu appears.
,
MOVIE ADVANCE
Would you like to go to
the start of the movie
or to the next preview?
I GO to movie
2 Go to preview
Press CLEAR to cancel
Press 1 to advance directly to the beginning of the
movie or press 2 to view the first (next) preview.
(Continues on next page)
MOVIE ADVANCE is a registered trademark of $RT,Inc.
I The MOVIE ADVANCE feature works 1
only on cassettes recorded in the SP
speed with the safety tab removed.
49
To Next Page
Loading...
Need help?
General
