3
FEATURES AND BENEFITS
1. The BMS incorporates fi ve products in one, negating the need for separate AC 240V
charger, solar regulator, DC-DC charge system, battery monitor and vehicle battery
isolator. The BMS will automatically select between charging sources, requiring no
input from the operator during its operation.
2. The BMS has no fan, which makes it SUPER quiet and very reliable.
3. The BMS is designed and manufactured in Australia, for Australian conditions, using
the latest electronic and design technologies. It is manufactured with high-quality
components to ISO9001 quality and ISO14001 environmental standards and backed
with Redarc’s quality service and two-year warranty.
4. The BMS’s DC-DC charging enables optimal charging of house batteries, even if they
have different chemical characteristics from the vehicle battery. The input voltage
can be above, equal to or below the output voltage.
5. State of Charge (SOC) indication means you will always know how charged the
battery is and how much longer it will need to achieve full charge. An easy to operate,
high-quality, user friendly liquid crystal display (LCD) module lets you know what’s
going on at all times.
6. The BMS is very reliable and includes in-built non-sparking battery connection,
reverse polarity protection (without depending on fuses) and short circuit protection.
The unit has undergone stringent safety & electrical compliance testing.
7. The unit’s easily selectable charging profi les make it suitable for charging all battery
types commonly used in modern caravans and motorhomes.
8. The unit disconnects automatically from the vehicle battery, so there is always power
to start the car.
9. Sophisticated fault detection monitors the house battery condition during all stages
of charge, keeping you and your caravan/ camper/ RV safe.
10. The BMS has a separate battery temperature sensor for automatic temperature
compensation and cut-out.
To Next Page
Loading...
Need help?
General
