— English Fillcontrol Plus — 06.07.2016 - Rev. B
10 Maintenance
Escaping hot medium can cause burns.
• Maintain a sufficient distance from the escaping medium.
• Wear suitable personal protective equipment (safety gloves and goggles).
Risk of serious injury or death due to electric shock.
If live parts are touched, there is risk of life-threatening injuries.
• Ensure that the system is voltage-free before installing the device.
• Ensure that the system is secured and cannot be reactivated by other persons.
• Ensure that installation work for the electric connection of the device is carried out by an electrician, and in compliance with
electrical engineering regulations.
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there is a risk of burns and other injuries at the connection
points, if pressurised hot water or hot steam suddenly escapes.
• Ensure proper installation, removal or maintenance work.
• Ensure that the system is de-pressurised before performing installation, removal or maintenance work at the connection points.
Note!
Ensure that maintenance is carried out annually.
In specific cases, the maintenance intervals depend on the operational conditions.
Note!
The annual maintenance is displayed upon expiry of the set operating time.
Use the "Quit" button to confirm the "Maintenance received" message.
Reset the maintenance counter in the Customer menu.
Note!
Maintenance tasks must be carried out only by specialist personnel or the Reflex Customer Service.
Confirm the maintenance tasks, see chapter 10.3 "Maintenance certificate " on page 40 .
To Next Page
Loading...
Need help?
General
