Placing Originals
17
1
Placing Originals
Note
Take care to place originals only af-
ter any correction fluid and ink has
completely dried. Not taking this
precaution could cause marks on
the exposure glass that will be cop-
ied onto paper.
Reference
For original sizes you can set, see
p.15 “Originals” .
Original Orientation
You can set the original orientation in
the following ways.
This function is useful for copying
torn or large originals.
Note
Originals should normally be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the orientation of the
originals. For details, see the expla-
nations of each function.
Placing Originals on the
Exposure Glass
A Lift the ADF.
Important
Do not lift the ADF forcefully. If
you do, the ADF cover might
open or be damaged.
B Place the original face down on
the exposure glass. It should be
aligned with the rear left corner.
1. Positioning mark
2. Left scale
Note
Start with the first page to be
copied.
C Lower the ADF.
Originals ADF Exposure
glass
GCCO
E.EPS
SET
EE.eps
ABU025S
ABU
S.eps