Copying
24
2
When copying onto regular
size paper
A Make sure the bypass tray is se-
lected.
Note
If any other paper tray is select-
ed, using {U} or {T} to select
the bypass tray.
B Press the {#} key.
C Select [Paper Size] using {U} or
{T}, and then press the {OK} key.
D Select [Regular Size] using {U} or
{T}, and then press the {OK} key.
E Select the paper size using the
scroll keys, and then press the
{OK} key.
The “
Accepted” message appears.
When copying onto custom
size paper
Important
You should specify the size of copy
paper to avoid paper misfeeds.
A Make sure the bypass tray is se-
lected.
Note
If any other paper tray is select-
ed, using {U} or {T} to select
the bypass tray.
B Press the {#} key.
C Select [Paper Size] using {U} or
{T}, and then press the {OK} key.
D Select [Custom Size] using {U} or
{T}, and then press the {OK} key.
E Enter the horizontal size of the
original using the number keys,
and then press the {OK} key.
Note
If you make a mistake, press the
{Clear/Stop} key, and then enter
the value again.
CPY
.t
CPY
.t
CPY
.t
CPY
.t
CPY
.t
CPY
.t