User Tools (Copier Features)
46
4
Orientation
• You can select the original orienta-
tion when making Combine cop-
ies.
Note
Default: Do not Specify
When you select [Always Specify],
you must select the orientation of
originals.
Max. Number of Sets
The maximum copy quantity can be
set between 1 and 99 using number
keys.
Note
Default: 99 sheets
Original Count Display
You can set to display the count of
originals and copying pages on the
display when [On] is selected.
Note
Default: Off
Reproduction Ratio
You can select which reduce, enlarge,
or input ratio is shown on the display
with priority when [Reduce] or [En-
large] is selected.
Note
Default:
• Metric version:
•Ratio 1: 50%
•Ratio 2: 71%
•Ratio 3: 93%
•Ratio 4: 141%
•Ratio 5: 200%
• Inch version:
•Ratio 1: 65%
•Ratio 2: 78%
•Ratio 3: 93%
•Ratio 4: 129%
•Ratio 5: 155%
You can set a ratio other than the
above.
A Press the {User Tools/Counter}
key.
B Select [Copier Features] using
{U} or {T}, and then press the
{OK} key.
C Select [Reproduction Ratio] using
{U} or {T}, and then press the
{OK} key.
D Select the ratio you want to
change using {U} or {T}, and
then press the {OK} key.
E Select [User R/E Ratio] using {U}
or {T}, and then press the {OK}
key.
F Enter a ratio using the number
keys (from 50–200%), and then
press the {OK} key.
The “
Programmed” message ap-
pears.
To Next Page
Loading...
Need help?
General
