Copier Functions
29
2
C Select a ratio using {U} or {T},
and then press the {OK} key.
The “
Accepted” message appears.
D Place your originals, and then
press the {Start} key.
Zoom
You can change the reproduction ra-
tio in increments of 1%.
Note
You can also select a preset ratio
close to the desired ratio using [Re-
duce] or [Enlarge], and then adjust
the ratio using {U} or {T}.
A Press [R/E].
B Press [Zoom].
C Enter the ratio.
To select the ratio using {U} and
{T}
A Adjust the ratio using {U} or
{T}.
Note
If you have incorrectly en-
tered the ratio, readjust using
{U} or {T}.
To change the ratio in incre-
ments of 10%, press and hold
down {U} or {T}.
B Press the {OK} key.
The “
Accepted” message ap-
pears.
To enter the ratio using the
number keys
A Enter the desired ratio using
the number keys.
B Press the {OK} key.
The “
Accepted” message ap-
pears.
D Place your originals, and then
press the {Start} key.
CP
Z
.eps
CPY
.t
CPY
.t
CPY
.t