Parameter Value configured
wpaenc {tkip|ccmp} You can specify WPA encryption key when using WPA
encryption.
tkip: TKIP
ccmp: CCMP (AES) (default)
wpaauth {wpapsk|wpa|
wpa2psk|wpa2}
You can specify the WPA authentication mode when using
WPA encryption.
wpapsk: WPA-PSK authentication (default)
wpa: WPA authentication
wpa2psk: WPA2-PSK authentication
wpa2: WPA2 authentication
psk “character string” You can specify the Pre-Shared key.
Usable characters: ASCII 0x20-0x7e (8 to 63 bytes).
The default is blank.
eap {tls|ttls|leap|peap} {chap|
mschap|mschapv2|pap|md5|
tls}
You can specify the EAP authentication type.
tls: EAP-TLS (default)
ttls: EAP-TTLS
leap: LEAP
peap: PEAP
chap, mschap, mschapv2, pap, md5, or tls are settings for
the phase 2 method, and must be set when using EAP-TTLS
or PEAP.
Do not make these settings when using other EAP
authentication types.
If you select EAP-TTLS, you can select chap, mschap,
mschapv2, pap, or md5.
If you select PEAP, you can select mschapv2 or tls.
username “character string” You can specify the login user name for the Radius server.
Usable characters: ASCII 0x20-0x7e (31 bytes).
The default is blank.
Remote Maintenance by telnet
191