Menu User Tool Setting Requirements
Interface Settings/Network Domain Name As required
Interface Settings/Network WINS Configuration As required
Interface Settings/Network Effective Protocol Necessary
Interface Settings/Network NCP Delivery Protocol As required
Interface Settings/Network NW Frame Type As required
Interface Settings/Network SMB Computer Name As required
Interface Settings/Network SMB Work Group As required
Interface Settings/Network LAN Type Necessary
Interface Settings/Network Permit SNMPv3 Communictn. As required
Interface Settings/Network Permit SSL/TLS Comm. As required
Interface Settings/Network Host Name As required
Interface Settings/Network Machine Name As required
Interface Settings/Wireless LAN Communication Mode Necessary
Interface Settings/Wireless LAN Ad-hoc Channel As required
Interface Settings/Wireless LAN SSID Setting As required
Interface Settings/Wireless LAN Security Method As required
• For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
• [Wireless LAN] and [LAN Type] are displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN are connected, the selected interface takes precedence.
• p.28 "Interface Settings"
2. Connecting the Machine
88
To Next Page
Loading...
Need help?
General
