Adjusting the Printer
75
M Check “Yes” is displayed, and then press the {# Enter} key to print gra-
dation correction sheet 2.
N Perform the same operations as used for setting the gradation correc-
tion value using correction 1 to set the gradation correction value of the
middle part using correction 2.
O After completing all settings, press the {Online} key.
“Ready” appears on the display.
❒ Displays on the screen are just examples.
Viewing the Color Calibration Sample Sheet and Gradation
Correction Sheet
The color gradation correction value setting sheet contains two color sample col-
umns“Sample 1” column for setting the highlight part, and “Sample 2” column for
setting the medium part.
Similarly, the gradation correction sheet contains: “Gradation correction sheet 1”
for setting the highlight part and “Gradation correction sheet 2” for setting the me-
dium part. Gradation correction sheet 1 is used for correction 1, while Gradation
correction sheet 2 is used for correction 2.
❖ Color sample and correction values
The following explains how to view the color sample of the Color Calibration
Sample Sheet and the correction values of the gradation correction sheet.
This explanation uses setting K (black) as an example. The setting method for
M (magenta) is similar. For C/Y (cyan/yellow), the correction value is deter-
mined based on combinations of these two colors, although panel settings are
made for each color.
To Next Page
Loading...
Need help?
General
