26
If you are using the camera for the first time, read this section.
Setting the Language
1
Push the ADJ./OK button !"NF
to select a language.
• When the DISP. button is pressed, the
language setting is canceled and the
date/time setting screen appears.
2
Press the ADJ./OK button.
• The display language is set, and the date/time setting screen
appears.
Setting the Date and Time
1
Push the ADJ./OK button !"NF to set the year, month,
date, time and format.
• Change the setting with !" and
move the item with NF.
• You can cancel the setting by pressing
the DISP. button.
• For information on how to use the
ADJ./OK Button, see P.16.
2
Check the information on the screen and then press the
ADJ./OK button.
• The confirmation screen appears.
3
Press the ADJ./OK button.
• The date and time are set.
• The language, date, and time can be changed at any time using the
[Language/N] and [Date Settings] items (GP.119) in the setup
menu (GP.114).
Note -------------------------------------------------------------------------------------
• The [Date Imprint] item (GP.72) in the shooting menu (GP.66) can be used
to stamp photographs with the date and time of recording.
• To retain the date and time settings, load a battery with adequate remaining
power for more than two hours.
•
If the battery is removed for more than one week, the date and time settings
will be lost. These settings must be made again.
To Next Page
Loading...
Need help?
General
