69
2
Shooting Menu
Pre-AF
If [On] is selected when [Multi AF], [Face Pr. Multi], [Subj. Tracking], [Spot AF], or
[Multi-trgt AF] is selected for [Focus], the camera will continue to focus even when
the shutter-release button is not pressed halfway. This may decrease the time
needed to focus when a picture is taken, potentially improving shutter response.
Exposure Metering
You can change the metering method (the range to use for metering) used to
determine the exposure value.
— Multi
The entire shooting range is divided into 256 partitions, and each is metered
to determine the overall exposure value.
Center
The entire image is metered, with emphasis on the center, to determine
the exposure value. Use this when the brightness of the center and
surroundings are different.
Spot
Only the center of the image is metered to determine the exposure value.
Use this setting when you want to use the brightness at the center. This is
useful if there is a marked difference in contrast or backlighting.
Image Settings
You can change the picture quality of an image, including the contrast, sharpness,
color and vividness.
Vivid
Take strong, vivid photos with higher contrast and sharpness and maximum
vividness.
— Standard
Creates an image with normal picture quality.
Cust. Settings
You can select from five [Contrast],
[Sharpness], and [Vividness] levels.
Black & White
Creates a black and white picture.
Sepia
Creates a sepia-toned picture.
To Next Page
Loading...
Need help?
General
