Changing the Display with
the DISP. Button
Pressing the DISP. button allows you to change the screen display
mode and toggle the information displayed on the picture display.
During Shooting Mode
Normal Symbol Display Zoom Assist Display
Picture Display Off
(Synchro-Monitor Mode)
No Display
Grid Guide Display
Histogram Display
Grid Guide Display -------------------------------------------------------------------
• This displays auxiliary lines on the picture display to help you compose your
picture. These lines are not recorded with images.
• Use [Grid Guide Display Options] on the setup menu to select the grid.
(GP.117)
Synchro-Monitor Mode -------------------------------------------------------------
This turns the picture display off except when the camera is operated. This is
effective for saving power consumption. In this mode, pressing the shutter release
button halfway turns the picture display on. Subsequently, pressing the shutter
release button fully displays the shot image on the picture display and then turns
the picture display off. (This setting is different from [LCD Auto Dim] in the setup
menu.)
To Next Page
Need help?
General
