Ricoh IM 350F User Manual

3. Load the paper face up until you hear the beep.
DVK494
4. Check the paper settings and change them if necessary.
5. Align the paper guides to the paper size.
If the guides are not flush against the paper, images might be skewed or paper misfeeds might
occur.
DVL409
• While you are printing, a message informing you that the size of the paper that is loaded and the
print setting are different may appear. To change the paper size, select [Job Reset] and load the
correct size paper, and then try printing again. To not change the paper size, select [Loaded
Paper].
• A message informing you that the size of the loaded paper and the print settings are different may
appear if multiple sheets are fed at one time. If this happens, take out the loaded paper, fan it, turn
it over, load it again, and then select [Loaded Paper].
• When you use the bypass tray, it is recommended to load the paper so that the paper will be fed
from its short edge.
• Select appropriate paper thickness for the loaded paper.
• When loading label paper:
• It is recommended to place one sheet at a time.
• Select the appropriate paper thickness on the screen of the bypass tray paper setting.
Loading Paper
179

Ricoh IM 350F Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	35 ppm
Print Resolution	1200 x 1200 dpi
Memory	2 GB
ARDF Capacity	50 sheets
Paper Output Capacity	250 sheets
Duplex Printing	Yes
Scan Resolution	600 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
Monthly Duty Cycle	50, 000 pages
Paper Size	A4, A5, A6, B5, Legal, Letter
Connectivity	USB 2.0, Ethernet
Mobile Printing	Apple AirPrint, Mopria, Google Cloud Print
Scan Speed	40 ipm
Scan to	Email, Folder, USB
Fax Resolution	200 x 200 dpi
Operating Systems	Windows, macOS, Linux
Hard Disk Drive	Optional