Turning On/Off the Power
• When you push the main power switch, wait at least 0.5 seconds after it is confirmed that the main
power indicator has lit up or gone out.
The main power switch is on the front left side of the machine. When this switch is turned on, the main
power turns on and the main power indicator on the right side of the control panel lights up. When this
switch is turned off, the main power turns off and the main power indicator on the right side of the control
panel goes out. When this is done, machine power is off.
When the fax unit is installed, fax files in memory may be lost if you turn this switch off. Use this switch
only when necessary.
This machine automatically enters Fusing Unit Off mode or Sleep mode if you do not use it for a while.
For details, see "Saving Energy", For First-time Users.
Turning On/Off the Main Power
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Do not turn off the power while the machine is in operation.
• Do not hold down the main power switch while turning off the main power. Doing so forcibly turns
off the machine's power and may damage the hard disk or memory and cause malfunctions.
• If a power outage is planned for your work environment, such as turning off the power of your
building to do maintenance, turn off the main power in advance. If the power outage occurs while
the main power is turned on, it may cause a malfunction.
Turing on the main power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Push the main power switch.
The main power indicator goes on.
Turning On/Off the Power
91
To Next Page
Loading...
Need help?
General
