Placing Originals
Placing Originals on the Exposure Glass
• Keep your hands away from the hinges and exposure glass when lowering the ADF. Not doing
so may result in an injury if your hands or fingers are pinched.
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
2. Place the original face down on the exposure glass. The original should be aligned to the
positioning mark
.
Start with the first page to be scanned.
3. Lower the ADF.
Left original beeper
The beeper sounds and an error message is displayed when you leave your originals on the
exposure glass after scanning.
The machine repeats 5 long beeps four times.
You can change the beeper setting under [Sound of Less Urgent Level] in the Screen Features
menu. For details, see "Screen Features", Settings.
Placing Originals in the Auto Document Feeder
Be sure not to load the original untidily. Doing so may cause the machine to display a paper misfeed
message. Also, be sure not to place originals or other objects on the top cover. Doing so may cause a
malfunction.
Placing Originals
95
To Next Page
Loading...
Need help?
General
