Specifications for the Main Unit
Configuration:
Desktop
Hard disk
250 GB or more
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning through CCD
CIS sensor is also used for scanning back side of ADF
Copy process:
LED alley and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Heating roll pressure system
Resolution:
• Scanning:
Exposure glass: 600 × 600 dpi
ADF: 600 × 300 dpi (front), 300 × 600 dpi (back) , 600 × 600 dpi
• Printing:
1200 × 1200dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23 °C (73.4 °F), rated voltage)
• (mainly Europe and Asia)
IM 350F IM 350 IM 430F
Normal mode 47.4 seconds 47.4 seconds 49.3 seconds
Quick mode 21.5 seconds 21.5 seconds 22.4 seconds
Specifications for the Main Unit
279
To Next Page
Loading...
Need help?
General
