Printer Features
126
5
PS Menu
This section describes the user tools in the PS Menu under Printer Features.
Default settings are shown in bold type.
This menu appears only when the optional PostScript 3 unit is installed.
" Data Format
You can select a data format.
•Binary Data
• TBCP
This setting is not effective when operating the machine with a parallel or
EtherTalk connection.
When operating the machine with a parallel connection, and also if the binary
data is sent from the printer driver, the print job is canceled.
When operating the machine with an Ethernet connection, the print job is can-
celed under the following conditions;
• The printer driver data format is TBCP, and the data format selected on the
display panel is Binary Data.
• The printer driver data format is binary, and the data format selected on
the display panel is TBCP.
" Resolution
You can set the print resolution in dots per inch.
The default setting is 600 dpi.
Reference
p.4 “Accessing User Tools”
To Next Page
Need help?
General
