51
4. User Tools (Copier Features)
Accessing User Tools (Copier Features)
This section is for key operators in
charge of this machine. Key operators
can change or make default settings.
Note
r Be sure to quit User Tools and re-
turn to the initial copy display
when all settings are complete.
This section describes system set-
tings for the copier function.
r Selected settings are highlighted.
r Any changes made with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.
Reference
For details, see "User Tools (Sys-
tem Settings)", General Settings
Guide.
Changing Default Settings
Note
r If a key operator code is set, the
key operator code input display
appears before you can change the
default settings. For details about
access codes, see “Key Operator
Tools”, General Settings Guide.
A Press the {User Tools/Counter} key.
B Select [Copier Features] using {U}
or {T}, and then press the {OK}
key.
C Select the menu using {U} or {T},
and then press the {OK} key.
APE028S
ABC DEF
MNOJKL
WXYTUV
ClearModes
User Tools/Counter
Clear/Stop
Start
To Next Page
Loading...
Need help?
General
