User Tools (Copier Features)
54
4
Duplex Mode Priority
You can select the type of Duplex
function effective when the machine
is turned on, reset, or modes are
cleared.
Limitation
r Available only for Type 2.
Note
r Default: 1 Sided
→
1 Sided
Orientation
•Type 1
You can select the original orienta-
tion when making Combine/Se-
ries copies.
•Type 2
You can select the original orienta-
tion when using the Combine/Se-
ries, or two-sided originals to one-
sided Duplex function.
Note
r Default: Do not Specify
r When you select [Always Specify],
you must select the orientation of
originals.
Max. Number of Sets
The maximum copy quantity can be
set between 1 and 99 using number
keys.
Note
r Default: 99 sheets
Original Count Display
You can set to display the count of
originals and copying pages on the
display when [On] is selected.
Note
r Default: Off
Reproduction Ratio
You can select which reduce, enlarge,
or input ratio is shown on the display
with priority when [Reduce] or [En-
large] is selected.
Note
r Default:
• Metric version:
•Ratio 1: 50%
•Ratio 2: 71%
•Ratio 3: 82%
•Ratio 4: 93%
•Ratio 5: 122%
•Ratio 6: 141%
•Ratio 7: 200%
• Inch version:
•Ratio 1: 50%
•Ratio 2: 65%
•Ratio 3: 78%
•Ratio 4: 93%
•Ratio 5: 121%
•Ratio 6: 129%
•Ratio 7: 155%
To Next Page
Need help?
General
