Technical Bulletin PAGE: 1/5
Reissued: 26-Apr-11
Model: Al-P1 Date: 13-Mar-08 No.: RG179008k
RTB Reissue
The items in bold italics have been corrected or added.
Subject: Firmware Release Note: Printer Prepared by: T. Hirakawa
From: 1st Overseas Tech Support Sec., 1st PQM Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
This RTB has been issued to announce the firmware release information for the Printer.
Version Program No. Effective Date
1.19 G1795746N May 2011 production
1.18 G1795746M November 2010 production
1.17 G1795746L April 2010 production
1.16 G1795746K January 2010 production
1.15 G1795746J December 2009 production
1.14 G1795746H June 2009 production
1.13 G1795746G May 2009 production
1.12 G1795746F April 2009 production
1.11 G1795746E February 2009 production
1.10 G1795746D November 2008 production
1.09 G1795746C September 2008 production
1.08 G1795746B June 2008 production
1.00 G1795746A 1st Mass production
Version Modified Points or Symptom Corrected
1.19 Symptom corrected:
1. PS jobs with a large number of images might be unexpectedly reset.
2. Multiple jobs that are released (printed from the hard disk) by the same user
might result in some of the jobs being recorded in the device's Job History
as being printed by "---". This only affects the use of the following Job
Types and only occurs if User Authentication is enabled:
- Sample Print
- Hold Print
- Locked Print
- Stored Print
3. If a job is submitted while the Printer application is still in the process of
starting up, the Printer application might stall with "Processing..."
displayed on the operation panel.
Other changes:
A new BitSwitch#6-7 has been added. When set to '1', if multiple collated
co
ies are
rinted
the device no lon
er res
onds to PJL USTATUS with the
To Next Page
Loading...
Need help?
General
