Technical Bulletin PAGE: 1/2
Reissued: 17-Nov-10
Model: Al-P1 Date: 13-Mar-08 No.: RG179004c
RTB Reissue
The items in bold italics have been corrected.
Subject: Firmware Release Note: Web Support Prepared by: T. Hirakawa
From: 1st Overseas Tech Support Sec., 1st PQM Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Other ( )
This RTB has been issued to announce the firmware release information for the Web
Support.
Version Program No. Effective Date
1.14 G1795743D October 2010 production
1.13 G1795743C December 2009 production
1.12 G1795743B June 2008 production
1.06 G1795743A 1st Mass production
Version Modified Points or Symptom Corrected
1.14 IMPORTANT:
When you update to this version of Web Support (ver. 01.14, Program No.
G1795743D), be sure to install the following firmware version (or newer)
together as a set, otherwise the machine will not function correctly.
Upgrade the firmware listed in the table below together as a set, according
to the options that are already installed on the customer's machine.
Firmware: Version: Program No.: Note:
Printer 1.18 G1795746M forG179
Network Support 7.34 G1795742J forG179
Other changes:
SSL-related changes:
Note: The new fields will only appear if Network Support firmware version
7.34 or later and Printer firmware version 1.18 or later have also been
applied to the device.
1. When the device creates a certificate request, it is now able to specify
which algorithm (SHA1 or MD5) it wants used to sign the certificate.
This has been implemented by adding a field "Algorithm Signature" to
the certificate request form.
2. Web Image Monitor now shows the certificate's key length in:
- Configuration > Security > Device Certificate > Details
To Next Page
Loading...
Need help?
General
