Getting Started
20
1
Turning On the Power
This section describes how to turn on/off the power.
❖ Power supply
This machine has two power switches: operation switch and main power
switch.
•Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up,
you can make use of each function.
• Main power switch (left side of the machine)
Turning off this switch makes the main power indicator on the right side
of the control panel go off. When this is done, machine power is completely
off.
When the fax unit is installed, fax files in memory may be lost if you turn
this switch off. Use this switch only when necessary.
Note
❒ This machine automatically enters Energy Saver mode and reduces its power
consumption if you do not use it for a while with its power “On”.
Reference
“Timer Settings”, General Settings Guide
Turning On the Main Power
Turn on the main power as follows:
A Make sure the power cord is firmly plugged into the wall outlet.
B Turn on the main power switch.
The machine turns on and “
Please wait...” appears on the display.
Both the main power indicator and the operation switch indicator light up.
ARC035S
StellaC3_Intro_F-AE_FM_forPaper.book Page 20 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
Need help?
General
