• The PCL 5c printer driver supports bidirectional communication. You can update the printer status
manually.
If Bidirectional Communication is Disabled
This section describes how to set up option, paper size and paper feed direction settings on your
computer manually.
1. Open the printer window.
• Windows Server 2003/2003 R2:
On the [Start] menu, select [Printers and Faxes].
• Windows Vista, Windows Server 2008:
On the [Start] menu, select [Control Panel], and then click [Printers] in [Hardware and Sound]
category.
• Windows 7, Windows Server 2008 R2:
On the [Start] menu, select [Devices and Printers].
• Windows 8/8.1, Windows Server 2012/2012 R2:
Click [Settings] on the Charm Bar, and then click [Control Panel]. When the [Control Panel]
window appears, click [View devices and printers].
2. Open the printer properties dialog box.
• Windows Vista, Windows Server 2003/2003 R2/2008:
Right-click the machine's icon, and then click [Properties].
• Windows 7/8/8.1, Windows Server 2008 R2/2012/2012 R2:
Right-click the machine's icon, and then click [Printer properties].
3. Click the [Accessories] tab.
If options in the [Accessories] tab are disabled, bidirectional connection is enabled. In this case, no
change is necessary for option settings.
4. Select options installed from the [Options] area, and then make the necessary settings.
5. Click [Change Input Tray Settings...].
6. In [Input Tray:] select which trays to use, and then, in [Paper Size:] select the size of the
paper that you want to load in each tray.
Click [Modify Input Tray/Paper Size] to apply the setting for each tray.
7. Click [OK].
8. Click [Apply].
9. Click [OK] to close the printer properties window.
Configuring Option Settings for the Printer
35
To Next Page
Loading...
Need help?
General