When You Have Problems Operating the
Machine
Problem Causes Solutions
When the machine is turned
on, the only icon that
appears on the home screen
is the [Copier] icon. (When
using the standard operation
panel)
Functions other than the
copier function are not yet
ready.
Wait a little longer.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions
appear in the User Tools
menu when they become
ready for use.
Wait a little longer.
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though the [Energy Saver]
key was pressed.
In some cases, the machine
does not enter Sleep mode
when the [Energy Saver] key
is pressed.
Before you press the [Energy Saver]
key, check that Sleep mode can be
enabled. For details about enabling
Sleep mode, see "Saving Energy",
Getting Started.
The display is off. The machine is in Low Power
mode.
Touch the display panel or press one
of the keys on the control panel to
cancel Low Power mode.
The display is off. The machine is in Sleep
mode.
When using the standard operation
panel
Press the [Energy Saver] key or
the [Check Status] key to clear
Sleep mode.
When using the Smart Operation
Panel
Press the [Check Status] key to
clear Sleep mode.
When You Have Problems Operating the Machine
159
To Next Page
Loading...
Need help?
General
